Horner-apg XLt OCS Manual de usuario descargar pdf (Pagina 34)

100

CH. 9 MAN0878-04-EN

August 12, 2009 Page 34 of 100 ECN # 979

Once the back is removed the jumper selection can be changed. The jumper settings are documented on

each data sheet using a diagram such as Figure 9.2 below and a description of the jumper settings.

Figure 9-2 – Example Jumper Diagram

To re-install the back cover, place the cover back on the unit. The DIN clip should be on the same side

as the power connector.

Place the screw back into the hole and turn the screw slowly counter clockwise until it clicks into the

threads. This prevents the screw from being cross-threaded. Now turn the screw clock-wise until the

cover is firmly secured. Repeat this process for all four (4) screws.

9.3 Model and I/O Overview

Table 9.1 – I/O and Model Overview

Model

(XLe or XLt)

Solid State

Digital

Outputs

Relay

Outputs

Digital

Inputs

Analog

Inputs

Universal

Analog

Inputs

Analog

Outputs

HEXxxx0

HEXxxx2

9 9 9

HEXxxx3

9 9

HEXxxx4

9 9

HEXxxx5

9 9

Table 9.1 shows the different types of I/O included with the various XLe/XLt models. Specific

specifications, jumper settings and wiring diagrams can be found on the data sheets attached at

the end of the manual. Descriptions and applications of the different type of I/O can be found

below.

J1 J2

JP3

JP1

001XLE005-R1

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Comentarios a estos manuales

Sin comentarios

Horner-apg XLt OCS Manual de usuario Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Horner-apg XLt OCS